Multiplex Twister ARF EDF RC Jet

Great looking EDF Jet flies fast, yet slows down for great landings

33-1/4" wing span, 44-3/4" length, 30 oz. flying weight. Made from "Elapor" foam. Airplane includes the ducted fan unit and a Himax brushless motor capable of producing 350 Watts of power. The fan unit is easily accessible even after assembly for motor maintenance. Using the recommended battery and speed controller you can expect Twister to cruise well at mid-throttle. With full throttle you can easily do nice round loops and rolls. Since Twister uses HS-55 servos there are no long linkage rods meaning there is far less slop in your control systems. Twister can easily be hand-launched and slows down to a crawl for those not-so-long or soft landing sites. The included instruction manual has over 30 diagrams and step-by-step instructions for a quick, accurate build. A 3-channel radio is required for elevator, ailerons, and throttle.

Radio
1 - HTR48725 Hitec Neon 3 SS, Micro 05 Receiver, 2 HS-55 Servos
1 - HTS045 Hitec HS-45 Servos
4 - HT0097 Hitec 12" Servo Extension

Motor/Prop
Himax 350 Watt brushless motor for ducted fans and Ducted Fan unit included with the airplane!

Motor Controller
1 - ABC45 Black 45 Amp Brushless Controller

Battery
2 - PQ33003 Twenty-Five 3 Cell 11.1V 3300 mAh LiPo

Charger
1 - ETC2700 Li-Poly Smart Charger, 1-5 Cells

Accessories
1 - MPX4222AP Accessory Pack for Twister EDF Jet
Glue, Solder, Connectors, etc.