Specifically designed for AXI OUTRUNNER motor, easy to build and fly!
50" wingspan, 40-1/2" long, 758 sq. in. wing area, 64 oz. flying weight. Totally designed as an electric airplane. Battery box and motor spacer for AXI motor on a radial mount are pre-built. There are only two places that require glue in the entire build. The rest is all assembled using a screwdriver and small wrench. All flying surfaces are pre-hinged and the mounting points for the pull-pull hardware are pre-drilled. Complete set of functioning flying wires is included. Airplane comes pre-built and pre-covered with all decorations in place, can be built in 4-6 hours. AXI motor provides lots of power, you will fly at less than 1/2 power most of the time. Flies best in light wind, slow flight, touch and goes, slips to landing--relaxed flying at its best. Instructions included. For 4 channels, Ailerons (2 servos), Elevator, Rudder and Throttle.
Here's Everything you'll need:
Radio
1 -
HTR971B Laser 4 Channel FM with 2 HS-322 Servos
2 -
HTS081 Hitec HS-81 Micro Servo
2 -
HT0097 Hitec 12" Servo Extension
1 -
HT0096 Hitec Aileron "Y" Connector
Motor/Prop
1 -
PM282010 AXI Gold 2820/10 Outrunner Motor
1 -
PM282002 Radial Mount Set for AXI 28 Series Motors
1 -
PE11055E 11x5.5E Thin Electric Prop
1 -
HLHS175B Spinner 1-3/4" Black
Motor Controller
1 -
JESAP40 Advance PLUS 40 Amp Brushless Motor Controller
1 -
JESAP01 Jeti Advance PLUS Program Card
* optional
Battery
1 -
PQ33003 eXtreme V2 3 Cell 3300 mAh 11.1V LiPo
Charger
1 -
GR6437 LiPo-Charger 4 Automatic Charger
1 -
BAT220 JST to Deans Ultra Charger Lead
Accessory Pack
1 -
RCM513AP Accessory Pack for Tiger Moth
Includes: Glue, Solder, Connectors, etc.
Type of Build: Almost-Ready-To-Fly (ARF)Skill Level: Intermediate