Telemaster 40 RC Airplane Kit

The world's BEST RC trainer -- now for electric or glow power!

73" wingspan, 53-1/2" long, 848 sq. in. wing area, 96 oz. flying weight, less than 16 oz. per sq. ft. wing loading. This is an all balsa and hardwood kit that takes about 40 hours to build and cover and install flight equipment. Hundreds of modelers have had their first successful flying experience with a Telemaster, and many beginners have successfully flown Telemaster 40 without assistance. The electric power system that we recommend will fly the airplane for over 10 minutes, with better performance -- quicker takeoffs, steeper climbs -- than a glow engine. The kit can be built as an electric powered airplane or as a .40 powered glow plane. For 4 or 5 channels: Rudder, Elevator, Ailerons (2 servos), Throttle. The kit also includes Flaps (1 servo). The Telemaster 40 is very easy to land and this makes it an excellent airplane for a beginner. If you are a beginner, build it fairly well, and do some imaginary flights before the actual first flight, you will probably have no problems soloing Telemaster 40 on your first RC flight. You can also fly Telemaster 40 with a glow engine.

Radio
1 - HTR8721 Optic 6 with Supreme Receiver, 4 HS-325HB Servos
1 - HTS0422 Hitec HS-422 Servo
2 - HLAE260 3" Servo Extension, Futaba J to JR
2 - HLAE320 24" Extension for Hitec/JR
2 - HT0097 Hitec 12" Servo Extension

Motor/Prop
1 - PM282612 AXI Gold 2826/12 Outrunner Motor
1 - PE13080E 13x8E Thin Electric Prop
1 - PM282002 Radial Mount Set for AXI 28 Series Motors

Motor Controller
1 - JESAP40 Advance PLUS 40 Amp Brushless Motor Controller
1 - JESAP01 Jeti Advance PLUS Program Card * optional

Battery
1 - TP420032 Pro Lite 3S2P 4200 mAh 11.1V LiPo

Charger
1 - GR6412 Graupner Ultramat 12 Automatic Charger

Accessory Pack
1 - HLA111EAP Accessory Pack for Telemaster 40 Electric
Includes everything else needed to complete your Telemaster 40 Electric