12 Foot Telemaster RC Airplane Kit

HUGE - Tom Hunt calls it "Balsa Overcast"!

143-1/2" wingspan, 90" long, 3050 sq. in. wing area (over 21 sq. ft.), 23 pounds flying weight, a little over 16 oz. per sq. ft. wing loading (and about 14 oz./sq. ft. when you count the lifting stabilizer). Laser cut wing ribs, aileron, stab and elevator ribs. Construction is conventional all balsa and plywood and the kit for this huge airplane is a veritable lumberyard. Nothing flies like a Telemaster! Its gentle handling character is legendary as is its ability to lift weight. This model can easily lift camera equipment or a camcorder and is so slow and stable that the photos and videos come out beautifully. It jumps off the ground with the recommended AXI 5330 Outrunner motor. Model is easy to build but requires a large area for construction. Wing is three-piece; center section is the width of the fuselage and bolts to it, the two wing panels bolt to the center section. The lift struts are functional and must be used. Wing panels can be built with flaps or without. Lifting stabilizer has an area of 672 sq. in. (larger than many airplane wings) and is removable for transport. Model can also be powered by a gas engine like the Zenoah G-26.

Radio
1 - HTR8721 Optic 6 with Supreme Receiver, 4 HS-325HB Servos
1 - HTS0422 Hitec HS-422 Servo
1 - HT0604 12" Aileron Extension w/Gold Pins
4 - HT0605 24" Aileron Extension w/Gold Pins
4 - HT0606 36" Aileron Extension w/Gold Pins
2 - HT0096 Hitec Aileron "Y" Connector
1 - HT00925 1800 mAh Receiver Nicad

Motor/Prop
1 - PM533024 AXI Gold 5330/24 Outrunner Motor
1 - PE20011E 20x11E Thin Electric Prop

Motor Controller
1 - JESAP90P Advance PLUS 90 Amp Opto Brushless Motor Controller
1 - JESAP01 Jeti Advance PLUS Program Card * optional

Battery
2 - PQ60005 Twenty-Five 5 Cell 18.5V 6000 mAh LiPo
2 - SER003 Powerpole Connectors, 4

Charger
1 - SRC506 IC6 Balance Lipo Charger

Accessory Pack
1 - HLA112AP Accessory Pack for 12 Foot Telemaster
Includes: Glue, Solder, Connectors, etc.