Glow powered Nostalgia Champion Sport flier
60" wingspan, 53" length, 660 sq. in. wing area, 6-3/4 pound flying weight. "Kwik Fly MK 3" was originally designed by Phil Kraft, the American and ex-World Champion in the 1970's. Conventional all wood built-up construction with rib and spar wings, covered in red and white heat shrink film. Construction is quick: you install the tail, ailerons, rudder and elevator, fuel tank, radio system, engine, fixed landing gear and control rods. Airplane is set up so that conversion to retractable landing gear is easy. Using the recommended glow engine and prop, Kwik Fly is capable of loops, rolls, inverted flight and strong climbs, yet it remains a docile flier in the air. Kit comes with a photo-illustrated manual with step-by-step instructions. All necessary hardware, landing gear, control horns, push rods and decals are included in the kit. Suggested for intermediate to advanced pilots. For 4 channels: Ailerons (2 servos), Elevator, Rudder/Nose Wheel Steering and Throttle.
Here's Everything you'll need:
Radio
1 -
HTR8721 Optic 6 with Supreme Receiver, 4 HS-325HB Servos
1 -
HTS0322S HS-322 Standard Servo
2 -
HT0604 12" Aileron Extension w/Gold Pins
Engine/Prop
1 -
TTR9141 Thunder Tiger Pro 46 RC Aircraft Engine
1 -
GP10060 10x6 Prop
Accessory Pack
1 -
GR9393AP Accessory Pack for Kwik Fly MK 3
Includes: Glue, Solder, Connectors, etc.
Type of Build: Almost-Ready-To-Fly (ARF)Skill Level: Intermediate