Hydro Plane 3D Land, Sea, Air Vehicle

Water, Land, Air - Fly it anywhere!

21-1/2" wide, 31" long, 8-1/2" tall, 10-1/2 oz. flying weight. Combines the looks of a Hydroplane racing boat with the performance of an aerobatic airplane. Built of vacuum-molded and laser-cut Depron parts along with carbon fiber reinforcements for lightweight strength. Model is equally at home running through the grass, skimming across the lake or looping and rolling through the air. Flight character is smooth with a high roll rate and broad speed range. Model is designed for pilots with experience flying aileron models; if you can fly a 3D foamie, you can fly Graupner's "Hydro Plane 3D". Model comes unpainted; the color choice is up to the modeler. Decals are included. Can be built in several hours following the clear photo-illustrated instructions. For 4 channels: Aileron and Elevator mixed (Elevon), Rudder and Throttle. A radio with expo mixing is recommended.

Radio
1 - HTR8726 Optic 6 with Electron 6 Ch. Receiver, 2 HS-55 Micro Servos
1 - HTS055 Hitec HS-55 Servos
1 - EF001 Lightenna "72" Micro Antenna

Motor/Prop
1 - PM220826 AXI Gold 2208/26 Outrunner Motor
1 - PM22004 Prop Saver Propeller Adapter for AXI 22 Radial Mount
1 - GPSP1810 7x4 Slowflyer Prop

Motor Controller
1 - JESAP08M Advance PLUS Mini 8 Amp Brushless Controller
1 - JESAP01 Jeti Advance PLUS Program Card * optional

Battery
1 - PQ08003 Twenty 3 Cell 11.1V 800 mAh LiPo

Charger
1 - ETC2500 LiPoly Smart Charger for 1-4 Cells
1 - BAT220 JST to Deans Ultra Charger Lead

Accessory Pack
1 - GR9556AP Accessory Pack for Hydroplane 3D
Includes: Glue, Solder, Connectors, etc.