![]() |
Props
for Electric Flight
|
| Home | Electric Flight Accessories | Slowflyer Props | |
Special Thin props for Electric flight |
|
|
Designed specifically for electric flight. These are lightweight, thin but quite stiff. These are different from the Slowflyer props (Hobby Lobby numbers P07040SF, etc.) and are intended for stronger motors than the slow and parkflyers use. |
|
Large thin electric props with more blade area |
|
19" Wide blade on the left, 19" normal
blade on the right |
Will load the motor and draw more amps than an APC thin electric prop of the same diameter and pitch. Use with heavier models or when your thin electric prop is not producing enough watts and increasing the prop diameter is not possible. Check your amp load with a watt meter to prevent overloading your system. |
|
Graupner G-Sonic props are manufactured on ultra-modern CAD/CAM (Computer-Aided-Manufacturing) machines and provide true running and tracking to the highest degree. Specially calculated airfoil sections for each propeller guarantee the best possible aerodynamic efficiency. Increase the performance of your airplane while reducing the noise generated by the prop. Made from ultra-high tensile strength plastic for great torsional rigidity. All propellers in this series have an 8mm center bore. Suitable for use on glow or electric powered airplanes. Available in sizes ranging from 11x6 to 22x12. |
|
CAM SPEED Props for High Speed electric pylon and Race planes |
|
|
The CAM ("Computer Aided Manufacturing") SPEED Prop series is for pylon race models and other high speed race airplanes. CAM Speed props have "tiplets" at each tip and an extremely thin blade thickness for maximum RPM. Made of carbon fiber reinforced plastic. For SPEED 400, 480, 500 and 600 motors. The 4.8/6mm hole sizes are for use with the Graupner Precision Spinners GR1298/2 and GR1298/3. The 8mm hole sizes are for spinner nos. GR1304/3, GR1304/4 and GR1304/5. |
|
CAM Props for
Electric Airplanes |
|
|
The CAM Prop series is for electric airplanes using SPEED 480, 500, 600 and larger motors. Made of carbon fiber reinforced plastic. CAM props have "tiplets" at each tip and all have an 8mm hole. The smaller props work with Precision Spinners GR1304/3, GR1304/4 and GR1304/5. The larger sizes work with spinners GR1384/3, GR1304/47 and GR1313/5. |
|
Low pitch CAM Props for Electric airplanes |
|
|
|
|
SPEED Props for fast
Electric Airplanes |
|
The SPEED Prop series is for fast flying electric models using SPEED 400, 480, 500 and 600 motors. Made of glass filled nylon. The 4.8/6mm hole sizes are for use with the Graupner Precision Spinners GR1298/2 and GR1298/3. The 8mm hole sizes are for spinner nos. GR1304/3, GR1304/4 and GR1304/5. |
|
| "SLIM" and "CAM SLIM" Electric Props for Geared 400's | |
|
Designed
for slow flying electric models using geared SPEED 280 or 400s
or using direct drive SPEED 500 and 600 motors. The SLIM line is made
of glass filled nylon and the CAM SLIM line is made of carbon fiber
reinforced plastic. The CAM SLIM props have "tiplets"
at each tip. To mount SLIM props, use Precision Spinners GR1384/3 or GR1304/47. Mount CAM
SLIM props with prop shaft adapters from the GR6053--
series. With precision spinner GR6035/2, the 5x4 prop is a perfect fit for the front of direct drive SPEED 300 motors.
|
|
|
Props for small motors |
|
| High performance carbon prop for AXI 5330/F3A motor | |
![]() |
Developed especially for the AXI 5330/F3A motor and tested by world class F3A pilots. Best for F3A pattern type aircraft with a flying weight of less than 10 pounds. Highest performance is reached with this prop and the AXI 5330/F3A with 10S lipoly pack of 20-25C cells (capacity from 3700 mAh to 5000 mAh). |
| Custom wood prop for large scale airplanes and AXI 5360/20 OUTRUNNER | |
![]() |
Custom wooden prop designed specifically for use with the AXI 5360/20 OUTRUNNER. Recommended for slow, realistic flying of large scale planes up to 33 pounds. When used with 10s Lipoly battery pack and a Jeti Advance PLUS 90 Amp controller, this motor and prop combination will reach approximately 3200 RPM, providing very realistic prop sounds and extremely high efficiency for low speed flights. |
AeroNaut Electric Props|
Increase
your electric airplanes performance: White - fiberglass |
Elliptical blades are wide and thin: designed specially for electric flight. Two styles: white nylon with fiberglass reinforcement and stronger black nylon with carbon reinforcement. 6x5 and 6.5x4 are for SPEED 400 direct drive. 7x7, 8x5 are for SPEED 400 with gearboxes and 7 to 8 cells and for direct drive on SPEED 500 and 600. 8.5x6 through 9.5x7 work well on SPEED 600 with gearboxes. and 10 to 12 cells. Carbon fiber types can accept about 500 greater rpm than the fiberglass props. Black - Carbonfiber |
Cart | Home | Electric Flight Accessories | Low Price Guarantee | Catalog | Contact Us
Phone: 1-866-WE-FLY-RC (1-866-933-5972)
Fax: 615-377-6948
Copyright © 1996-2008 Hobby Lobby International, Inc. All Rights Reserved.