Castle Creations Phoenix HV Brushless Motor Controls from Hobby Lobby!

Phoenix HV Brushless Motor Controls

The Phoenix HV line offers a full range of ESCs for all your high voltage applications -
Good to 50 Volts!

Castle Phoenix HV Brushless Speed Controls are ready for use, right from the package, but they are also fully programmable using the Castle Link USB interface and software (sold separately). Users may configure their controller in a wide variety of settings including low voltage cutoff behavior, braking profiles, throttle reaction, and start power. A full range of helicopter governor settings is only a few clicks away.

All Castle Creations Phoenix HV Speed Controls have:

Safe "Power On"
Are microprocessor controlled
Tough surface mount construction
Audible arming signal
Auto motor cut-off with reset

Low torque "Soft Start"
Smooth reverse exponential throttle
Self-calibrating endpoints
Auto shut-down when signal is lost
Simple setup

Phoenix HV Controller PDF Instruction Manual

Phoenix HV 30 Amp

Phoenix HV-30 easily handles 30 amps at up to 50 volts; that’s 1,500 watts in a package that is nearly the same size as the standard Phoenix-35 controller. Use Phoenix HV-30 anywhere high-power and light weight are critical. This controller will bring a whole new dimension of power and efficiency to electric aircraft. Use voltage, not amps to get the power that you need. An HV setup allows use of lower capacity cells and lighter wire gauges. This is a perfect recipe for small high-performance applications such as racers or small helicopters OR long endurance applications such as AULD or small UAVs.

Phoenix HV 45 Amp

The Phoenix HV-45 brings the awesome power of high voltage systems within the reach of almost any modeler. Don't let the amp rating fool you here - 45 amps and 50 volts adds up to over 2,000 watts of power! The Phoenix HV-45's compact size and light weight make high voltage systems a realistic possibility for even small field aircraft and small to medium sized helicopters. Use the Phoenix HV-45 in your next .40 size electric conversion and marvel at the extra power and runtime that high voltage systems are known for. Do you like large aircraft? We powered an 11 lb. Funtana 90s with a Phoenix HV-45 controller and a 12s Lipo battery pack for unlimited verticals and wild 3D maneuvers.

Phoenix HV 85 Amp

The Phoenix HV-85 has the power handling capability for just about anything you can put into the sky! With a total ability of over 4,000 watts (that's 5 horsepower!), The Phoenix HV-85 is right at home in all 1/4 and giant scale fixed wing aircraft, and large helicopters. Top competition F3A, giant scale aerobatics, and large helicopters - The Phoenix HV-85 does it all, and keeps it's cool while flowing the power.

Phoenix HV 110 Amp

Can you handle this much power? This controller is ahead of it's time, and waiting for motor and battery technology to catch up to it. Make sure you're sitting down first before comparing the price to competing products with similar capabilities. Inexpensive does not mean anything was sacrificed in design and component quality. We know everything in your large aircraft rides on having smooth power you don't have to think about, so when it comes time to step up in electric capability, rely on Phoenix HV for quality designed speed controllers.

ESC	Max Amps	Max Input Volts	Resistance	Size	Weight	BEC
PHXHV-30	30 Amps	50 Volts	0.005 Ohms	2 x 1 x .5"	1 oz. (27g)	None
PHXHV-45	45 Amps	50 Volts	0.003 Ohms	2.6 x 1.05 x .5"	1.9 oz. (59g)	None
PHXHV-85	85 Amps	50 Volts	0.0015 Ohms	2.8 x 1.55 x 1 "	4.2 oz. (119g)	None
PHXHV-110	110 Amps	50 Volts	0.001 Ohms	2.8 x 1.55 x 1.25"	5.3 oz. (150g)	None

Phone: 1-866-WE-FLY-RC (1-866-933-5972)
Fax: 615-377-6948